Black Frame Insertion (BFI) Explained: Does It Really Reduce Motion Blur?

Why sample-and-hold screens blur motion, how inserting black frames sharpens it, what you give up in brightness and flicker, and how to try BFI safely.

Published

Run the black frame insertion test

What Is Black Frame Insertion, and Does It Really Reduce Motion Blur?

Black frame insertion (BFI) is a display mode that shows a black image between normal frames, so each picture is visible for a shorter time and your eyes see less blur when they follow moving objects.

I first tried it on a 120Hz monitor expecting a gimmick. While I scrolled a page of text, the words stayed readable mid-scroll instead of turning into grey mush. Then I noticed the screen looked dimmer and, at 60Hz, flickered enough to bother me. That trade is the whole story of BFI.

The idea is old, but vendors keep renaming it, and it overlaps with backlight strobing in gaming monitors. This guide explains why sample-and-hold screens blur in the first place, how BFI improves motion clarity, what it costs in brightness and comfort, and how to try it safely.

How Does Black Frame Insertion Work?

Black frame insertion works by alternating each normal frame with a dark one, so the screen is lit for only part of every frame period instead of all of it.

On LED monitors the backlight switches off for the dark period, while on an OLED the pixels themselves turn off. Either way, what you see is a short flash, then darkness, then the next short flash. Your eye blends the flashes into motion but has less time to drag each image across its view, so the smearing shrinks.

A software-based BFI mode does this with the graphics card. On a 120Hz screen it sends one real frame and one black frame, so the content effectively runs at 60 frames with dark gaps between them. A hardware mode does the same inside the monitor and can make the dark period shorter.

Nothing new is being drawn. The game or video keeps its own frame rate, and BFI only changes how long each frame is shown, which is why it reduces persistence rather than raising smoothness.

Why Do Modern Screens Blur Moving Objects?

Modern screens blur moving objects because they hold each frame steady for the whole refresh period while your eyes keep moving, so the image smears across your vision until the next frame replaces it.

When you follow a moving object, your eyes glide smoothly, but the picture only jumps once per full refresh. During each held lit frame, the image stays put while your gaze keeps going, and that mismatch is the blur you see. All consumer OLED displays work this way too, so fast pixels alone do not remove it.

That is why motion interpolation, which invents intermediate positions between real frames, and BFI attack the same blur from opposite directions. A fully black frame between real ones means the screen goes dark for part of every cycle, which changes the emission pattern rather than the content. Unlike interpolation, BFI doesn't add frames, so it avoids the soap-opera look some viewers dislike.

What Other Ways Are There to Cut Motion Blur?

The other ways to cut motion blur are to raise the frame rate and refresh rate together, or to flash the image, and each one shortens how long a single frame stays visible.

Blur is measured as MPRT, short for moving picture response time, and the lever behind it is pixel visibility time. Halve how long each frame is visible and you roughly halve the blur that eye tracking produces. Brute force does this by doubling the frame rate; flashing methods do it by adding darkness. Some OLED modes cut each source frame time in half to make room for the dark period.

Brute force is the comfortable option, with no flicker and no brightness loss, but it needs a very fast panel and a graphics card that can keep up. Flashing is the cheapest motion blur reduction in GPU terms, but it paints a shorter flash on your retina, which some people notice as flicker, especially at lower refresh rates.

What Do You Give Up When You Turn BFI On?

Turning BFI on costs you brightness and adds flicker, and the lower the frame rate of what you watch, the more obvious the flicker becomes.

Every blur-reduction method sits somewhere on the same trade-off:

MethodHow it shortens visibilityNames you will see
Higher refresh rateMore frames, each shown for less time480Hz OLED panels
Flicker-based refreshThe screen draws, then fadesCRT, plasma
Hardware backlight strobingThe backlight flashes once per frameULMB, DyAc, ELMB, PureXP, Lightboost
OLED black-frame modesPixels switch off between framesOLED Motion, G-Sync Pulsar
Software emulationThe PC draws the dark periodCRT Electron Beam Simulator, software BFI

Every flashing method pays for clarity with light, because the screen is dark part of the time. Software BFI also needs a screen running at 100 Hz or faster, since at 60 Hz each flash is slow enough to see. Anything that flashes the screen can also trouble people who are sensitive to flicker.

Does BFI Work Differently on OLED and LCD Screens?

BFI works differently on OLED and LCD screens: LCDs flash a backlight that sits behind the pixels, while OLEDs switch the pixels themselves off, and the two handle frame timing in their own ways.

On most LCDs, a half-frame-rate software pattern cuts blur by approximately 50%, a big gain for no extra hardware. OLEDs can switch faster, which makes their black-frame modes look cleaner, but they start with less brightness headroom, so reduced brightness is more noticeable on them.

Whatever the panel type, film content is a poor match. 24FPS or 30FPS video will flicker intensely with standard BFI, so I leave it off for movies and turn it on for games and fast sports, where the frame rate is high enough for the flashes to blend together.

How Do You Test Black Frame Insertion Safely in a Browser?

To test black frame insertion in a browser, compare the same moving image with and without black frames on a screen running at 100Hz or more, after reading the flicker warning.

Follow these steps in order:

  1. Read the warning: the demo carries a photosensitivity warning; skip it if you have epilepsy or are sensitive to flashing light.
  2. Clear the system: quit Task Manager and RGB keyboard software, which can add microstutter, and close other tabs.
  3. Check the browser: turn on GPU acceleration; in Safari, turn off Prefer Page Rendering Updates Near 60fps.
  4. Pick the screen: run the test on the primary monitor; on a laptop, use Performance Mode and the highest-performance GPU.
  5. Compare: watch the moving object with BFI on and off, and judge edge sharpness, brightness and flicker.

If your monitor has its own BFI or strobing mode, compare it with the black frame insertion test here, and check the product's documentation for which refresh rates support it.

More free tools

View all tools