Ghosting Test – Check Your Monitor for Motion Trails

This free ghosting test moves squares across black, white, grey and colour bands so slow pixel response and overshoot are easy to spot on your monitor or TV.

Updated

960 px/s
Speed (px/s)
–
Frame rate (FPS)
–
Frame time (ms)
–
Refresh rate (est. Hz)
–

Measuring…

What is monitor ghosting?

Every pixel on an LCD screen needs a little time to change from one colour to the next. This is the response time, usually quoted as grey-to-grey (GtG) in milliseconds. When a pixel is still changing as the next frame arrives, a faded copy of the moving object is left behind. That trail is ghosting.

Manufacturers speed pixels up with overdrive, which briefly pushes extra voltage so the pixel changes faster. Too little overdrive leaves a trail; too much makes the pixel overshoot its target, which shows up as a bright or coloured halo called inverse ghosting or overshoot. This test helps you find the setting where neither problem is visible.

How to run the ghosting test

  1. Dim the room so reflections do not hide faint trails.
  2. Set your monitor to its native resolution and highest refresh rate.
  3. Start at the default speed and follow the squares with your eyes, not by staring at the middle.
  4. Look at the trailing edge of each square on every colour band.

What you are looking for

What you seeWhat it usually means
A faint trail of the same colour behind the squareSlow pixel response (ghosting)
A bright or dark halo, often with a different colour, behind the squareOvershoot (inverse ghosting) from overdrive set too high
A long dark smear on dark bandsSlow dark transitions, common on VA panels
No trail but the square looks soft while movingMotion blur from the sample-and-hold display, not ghosting
The square jumps or hitches instead of trailingLate or skipped frames, not ghosting: use the stutter test or frame skipping test

Ghosting by panel type

The type of panel in your monitor or TV has a bigger effect on ghosting than almost any setting.

PanelTypical behaviour in this test
IPSFast and even on most bands. Look for a faint glow on the grey band if overdrive is set high.
VAStrong contrast, but changes from black to dark colours are slow. Expect a dark smear on the black bands, most visible on the red and blue squares.
TNVery fast pixel response with little trailing, though colours and viewing angles are weaker.
OLEDPixels change almost instantly, so true ghosting is very rare. Any softness you see is motion blur from the way the image is held on screen.

How to choose the best overdrive setting

  1. Open your monitor's on-screen menu and find the setting called Overdrive, Response Time, Trace Free or similar.
  2. Set your refresh rate to the value you actually use, because overdrive is tuned for each refresh rate.
  3. Try each level in turn: off, low, medium, high. Run the test for a few seconds at each one.
  4. Pick the level with the shortest trail and no bright or coloured halo. On many monitors this is the middle setting, not the strongest one.
  5. If you use G-Sync or FreeSync, also check at a lower frame rate. Some monitors tuned for their top refresh rate overshoot when the frame rate drops.

Ghosting vs motion blur: why refresh rate matters

Even a screen with instant pixels looks blurry in motion, because each frame stays on screen until the next one arrives while your eyes keep moving. This is called sample-and-hold blur, and its width is roughly the motion speed multiplied by how long each frame is shown.

Refresh rateTime each frame is shownApproximate blur at 960 px/s
60 Hz16.7 msabout 16 px
120 Hz8.3 msabout 8 px
144 Hz6.9 msabout 7 px
240 Hz4.2 msabout 4 px

So if the squares look soft but have no separate trail, you are seeing motion blur rather than ghosting. Raising the refresh rate, or using a strobing mode, reduces it. You can see the effect directly with the black frame insertion test, and compare how different frame rates look with the frame rate test.

How to reduce ghosting

  • Open the monitor menu and change the response time or overdrive setting. A middle setting is often cleanest; the fastest setting can cause overshoot.
  • Raise the refresh rate to the panel's maximum, since overdrive is tuned per refresh rate. Check that your computer can keep up at that rate with the FPS test.
  • Check for a firmware update from the manufacturer.
  • On TVs, use game mode and disable motion smoothing.

This is a visual test, so results depend on your eyes and room. For a stricter measurement, reviewers use pursuit photography and a colorimeter-style response tool. To compare motion clarity techniques, try the Black Frame Insertion Test.

Ghosting test FAQ

Is ghosting the same as motion blur?

No. Ghosting is a trail caused by pixels changing colour too slowly. Motion blur on modern screens mostly comes from your eyes tracking an image that stays still for the whole frame.

Why is the test colourful?

Pixels respond at different speeds depending on the colours they switch between. Six bands cover black, white, grey and common colours so uneven response shows up.

Can software fix ghosting?

Not really. It is a property of the panel, but the monitor's overdrive setting can improve or worsen it.

Is ghosting a defect covered by warranty?

Usually not. Some ghosting is normal for each panel type and is not treated as a fault. A sudden change, such as trails that were not there before, is worth reporting to the manufacturer.

Why do I only see ghosting on dark backgrounds?

Changes between black and dark colours are the slowest for most LCD panels, especially VA. That is why the black bands in this test show more trailing than the white and grey ones.

Does "1 ms response time" mean no ghosting?

Not necessarily. The figure is usually measured on the fastest transition at the highest overdrive level. Real transitions vary, so it is best to check with your own eyes using a test like this one.

More free tools

View all tools